DISPLAY_MODE() replaces LAYOUT() with "full", "spectrum", "minimal" and
"deck" ("auto" follows Shift+M; the old names still work). When the
layout on screen changes, the time and L/R meters stay lit while the
other sections go dark and light up one after another with a short
overshoot, like a display switching modes in hardware. A pinned mode or
a fallback to the same layout only flashes the mode lamps.
The analyzer's display range follows the music: its top rises with the
loudest band and falls 4 dB/s within -26..-6 dBFS, never reaching below
the analyzer floor, so silence stays dark. Spectrum mode caps the
analyzer at 18 rows and centres the panel; minimal mode is at most 132
columns wide and centred. Deck mode adds AMS, NR [B], AUTO REVERSE and
REW / FF lamps and a tape counter that races during a seek.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PLAY / PAUSE / STOP are drawn as full 14-segment letters (box-drawing
diagonals, a split middle bar, centre strokes) with faint unlit segments,
so the word no longer mixes segment and dot-matrix styles. Unlit lamps are
brighter and keep their level at night; the balance marker is two thin
segments over a bright centre mark; analyzer peak marks hold, then fall with
growing speed; and the lower-right block is one digital module with captions
and equally tall digits for track and volume.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new CycleVisualizerMode action (Shift+M by default) steps the fullscreen
visualizer's display mode; the choice is saved in visualizations.toml and
reaches scripts as input.mode. The VFD panel uses it for its classic, focus,
minimal and tape modes, with a row of mode lamps after each change and a
step-down when a mode does not fit the window.
Polish: quieter signal-path lines with lit boxes and nodes, two-cell peak
marks and a mid-level red zone in the level meter, A and Y in a 14-segment
style with thin diagonals, an analyzer tint from warm amber in the bass to
light yellow in the treble, and bar inertia that is separate from peak hold.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The analyzer shows three levels of glow (a dimmer foot, the body, a nearly
white top segment), faint unlit segments and a light peak-hold mark, on a
nonlinear scale; loud columns glow brighter on their own instead of the
whole panel brightening. The peak frequency becomes one measuring module
(caption, held value, rule, sample rate) with a real hold. The signal path
is a schematic of framed boxes on a bus with nodes, a wire to the lower row,
a pulse that now and then runs along it and a SIGNAL PATH state label.
PLAY / PAUSE / STOP use segment letters with centre strokes, mode lamps get
indicator bars, paused colours fade into unlit phosphor, and a new source
goes dark and relights with its value. LAYOUT() chooses between the full
panel, a spectrum focus and a tape deck composition, or picks by size.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Verticals of the segment digits now use quarter blocks, as thick as the
eighth-block horizontals, and the mesh behind them is gone; unlit segments
are fainter so lit digits read clearly. The routing display uses label
plates without sides, and its wire runs along cell edges from the volume
plate's corner straight down to the tone plate's corner, so it joins
cleanly. The bass / treble fans are single thin strokes instead of braille
lines, and the braille amplifier and speakers are gone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The VFD panel gains a dot-matrix title line (5x7 Latin and Cyrillic in
braille, smooth scrolling), palettes, optional needle VU meters, a night
dimmer, a filament "breath" and loudness brightening, uneven digit
brightness, a mesh behind the big digits, a tape counter, LOUDNESS / MUTE /
SEARCH lamps, a burst of static on track and source changes, and a standby
clock with a sweep at the top of every minute.
The visualization clock now shows local time (it showed UTC), and scripts
get clock_hour, clock_minute, clock_second and clock_millis from the same
reading.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Scripts now receive the spectrum, channel levels, sample rate and track,
queue and transport details; may return #{ commands, state } to keep state
between frames (with dt and frame, reset on reload and on opening); can draw
thin braille dots and lines (clipped to the area); and can set bold, dim,
italic, underline or reversed on any command. v2 scripts keep working.
The bundled "VFD panel" preset uses all of it for a vacuum-fluorescent hi-fi
front panel in a thin style: segment counter, peak level meter, 25-band
analyzer with peak hold, tone fans, routing diagram and transport lamps,
with a power-on segment test, a counter search on track changes and an
OVER lamp.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A device restarted with a "share" decision that another device of its
group revoked meanwhile sent that card again: the first reconciler pass
called sync_shares from the stale registers before device sync ran.
Until DeviceSync says the registers are current (a sync exchange with a
v4 device of the group after the store was attached, or no such device
to wait for), passes now only unpublish cards the local registers no
longer share and never call sync_shares.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
README, ARCHITECTURE, CHANGELOG and AGENTS describe the immediate
revocation and quit-time wait, decision-bound confirmations, the card
URL filter, devices that left the group, the separate bounded podcast
search, and which direction of a moved feed the search mark covers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A stream without a file size whose decoder cannot measure its duration
only has the feed's itunes:duration, which is often longer than the
audio. Treat that duration as a hint: a clean close past 80 % of it is
the end. A duration the decoder measured keeps the strict completion
window. The interrupted message for a stream that cannot seek now says
to start over or mark the episode played instead of "press play".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A device below sync v4 got no playback snapshot while the queue held an
episode, so its engine never heard the owner's heartbeat and took
playback over by automatic failover after two minutes; this device then
adopted its queue and the episodes were gone. Send such peers the
coordination envelope with the queue redacted like for Jam: every
episode becomes an opaque "Private item", nothing is stripped, and their
commands stay refused while the queue has episodes.
This departs from FRID PLAYBACK_PROTOCOL.md rule 1 ("send None") and is
reported as a contract gap.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
README explains that podcast state is private by default, syncs only
between trusted devices and streams audio from the publisher, plus
handoff, Jam and older devices. ARCHITECTURE, AGENTS and the changelog
describe protocol v4, version gating, the podcast store bridge and the
invariants (no numeric ids for episodes, versions only from the device
itself).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>