DISPLAY_MODE() replaces LAYOUT() with "full", "spectrum", "minimal" and
"deck" ("auto" follows Shift+M; the old names still work). When the
layout on screen changes, the time and L/R meters stay lit while the
other sections go dark and light up one after another with a short
overshoot, like a display switching modes in hardware. A pinned mode or
a fallback to the same layout only flashes the mode lamps.
The analyzer's display range follows the music: its top rises with the
loudest band and falls 4 dB/s within -26..-6 dBFS, never reaching below
the analyzer floor, so silence stays dark. Spectrum mode caps the
analyzer at 18 rows and centres the panel; minimal mode is at most 132
columns wide and centred. Deck mode adds AMS, NR [B], AUTO REVERSE and
REW / FF lamps and a tape counter that races during a seek.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PLAY / PAUSE / STOP are drawn as full 14-segment letters (box-drawing
diagonals, a split middle bar, centre strokes) with faint unlit segments,
so the word no longer mixes segment and dot-matrix styles. Unlit lamps are
brighter and keep their level at night; the balance marker is two thin
segments over a bright centre mark; analyzer peak marks hold, then fall with
growing speed; and the lower-right block is one digital module with captions
and equally tall digits for track and volume.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new CycleVisualizerMode action (Shift+M by default) steps the fullscreen
visualizer's display mode; the choice is saved in visualizations.toml and
reaches scripts as input.mode. The VFD panel uses it for its classic, focus,
minimal and tape modes, with a row of mode lamps after each change and a
step-down when a mode does not fit the window.
Polish: quieter signal-path lines with lit boxes and nodes, two-cell peak
marks and a mid-level red zone in the level meter, A and Y in a 14-segment
style with thin diagonals, an analyzer tint from warm amber in the bass to
light yellow in the treble, and bar inertia that is separate from peak hold.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The analyzer shows three levels of glow (a dimmer foot, the body, a nearly
white top segment), faint unlit segments and a light peak-hold mark, on a
nonlinear scale; loud columns glow brighter on their own instead of the
whole panel brightening. The peak frequency becomes one measuring module
(caption, held value, rule, sample rate) with a real hold. The signal path
is a schematic of framed boxes on a bus with nodes, a wire to the lower row,
a pulse that now and then runs along it and a SIGNAL PATH state label.
PLAY / PAUSE / STOP use segment letters with centre strokes, mode lamps get
indicator bars, paused colours fade into unlit phosphor, and a new source
goes dark and relights with its value. LAYOUT() chooses between the full
panel, a spectrum focus and a tape deck composition, or picks by size.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Verticals of the segment digits now use quarter blocks, as thick as the
eighth-block horizontals, and the mesh behind them is gone; unlit segments
are fainter so lit digits read clearly. The routing display uses label
plates without sides, and its wire runs along cell edges from the volume
plate's corner straight down to the tone plate's corner, so it joins
cleanly. The bass / treble fans are single thin strokes instead of braille
lines, and the braille amplifier and speakers are gone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The VFD panel gains a dot-matrix title line (5x7 Latin and Cyrillic in
braille, smooth scrolling), palettes, optional needle VU meters, a night
dimmer, a filament "breath" and loudness brightening, uneven digit
brightness, a mesh behind the big digits, a tape counter, LOUDNESS / MUTE /
SEARCH lamps, a burst of static on track and source changes, and a standby
clock with a sweep at the top of every minute.
The visualization clock now shows local time (it showed UTC), and scripts
get clock_hour, clock_minute, clock_second and clock_millis from the same
reading.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Scripts now receive the spectrum, channel levels, sample rate and track,
queue and transport details; may return #{ commands, state } to keep state
between frames (with dt and frame, reset on reload and on opening); can draw
thin braille dots and lines (clipped to the area); and can set bold, dim,
italic, underline or reversed on any command. v2 scripts keep working.
The bundled "VFD panel" preset uses all of it for a vacuum-fluorescent hi-fi
front panel in a thin style: segment counter, peak level meter, 25-band
analyzer with peak hold, tone fans, routing diagram and transport lamps,
with a power-on segment test, a counter search on track changes and an
OVER lamp.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The analyzer now keeps a full-rate mono PCM history and per-window left/right
RMS and peaks. The FFT and all ballistics run on the reader side when a
snapshot is taken, so the audio callback only appends samples: 31 bands with
exact base-2 edges that partition the FFT bins, an ~85 ms window that follows
the sample rate, time-based attack/fall/peak hold, and silence only after the
PCM counter has stalled for longer than a few device callbacks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A device restarted with a "share" decision that another device of its
group revoked meanwhile sent that card again: the first reconciler pass
called sync_shares from the stale registers before device sync ran.
Until DeviceSync says the registers are current (a sync exchange with a
v4 device of the group after the store was attached, or no such device
to wait for), passes now only unpublish cards the local registers no
longer share and never call sync_shares.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Share-off and unsubscribe now take a revocation ticket on the UI thread
before the write starts and ask for the immediate pass from the blocking
task once the write succeeded, so quitting right after Shift+F (before the
write's event was handled) still waits for the tombstone. With the
federation off or not started yet, a podcast that was shared counts as
possibly not revoked: the reconciler keeps it in the Off reports until the
overlay runs, the side panel says the card may not be revoked yet, and the
quit-time flush logs a warning.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Public podcast hosts and CDNs name artwork and pages by UUIDs and
content hashes, so the random-looking path rule dropped the artwork of
most public podcasts. Artwork and links now follow the query and host
rules only; a member feed's artwork is still left out with its feed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A confirmation is recorded as pending before the share decision is
written and covers the next newer decision. When the write failed (the
podcast was unsubscribed by a sync meanwhile, a database error), the
pending entry stayed and later covered a decision taken on another
device that this user never saw. Put the previous entry back on failure,
and drop pending entries left in the file by a call that never finished.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
FRID's sync_shares keeps publishing a card whose feed URLs this device
already publishes, even without the privacy confirmation. A device that
missed an intermediate share-off would go on publishing a private-looking
URL nobody confirmed for the new decision. share_plan now leaves such a
podcast out of the states, so sync_shares revokes the old card, and
reports it as held back itself.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The card and the share dialog measure their word-wrapped height the
way it is rendered (ratatui's rendered-line-info), and scroll keys stop
at the last line instead of running past it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Subscribing to an older address whose feed announces a newer one this
device already follows (itunes:new-feed-url without a redirect) reports
the existing subscription instead of adding a second one, and a card
whose feed moved to a followed address reads «Уже подписан» once its
episodes were read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The share dialog shows the feed URLs only, so a card no longer carries
an artwork or web page URL that looks like it holds an access key, and
a member feed's card carries neither.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A privacy confirmation now covers the share decision it was given for,
not only the URLs: sharing turned off, or turned on again after a
revocation, on any trusted device drops it, so this device asks again
before it publishes a feed URL that looks private.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Turning sharing off or unsubscribing runs a reconciler pass right away,
and quitting waits up to 4 s for it. The Podcasts tab tells a private
podcast whose card from this device is still live, failed revocations
are reported without ids, the overlay peer count stays current, and the
reconciler loop is tested against a loopback overlay.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Federated music results no longer wait for the discovery overlay: the
podcast search runs as its own task, bounded at 15 s including the
overlay's bootstrap, and arrives as its own event.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Cover the merge order of podcast hits, alias resolution, the feed
preview, subscribing from a card (same podcast id as by URL, never a
claimed URL, forged ids refused) and an end-to-end run: a stranger's
node finds a shared card over loopback overlay nodes, subscribes
privately, refreshes from a local feed server and keeps the
subscription after the publisher stops sharing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Federated search also queries the podcast discovery overlay and lists
the podcast entries of merge_search_results after the music results,
marked [podcast], with the publishing devices or "subscribed" (also
through a feed alias resolved off the UI thread). Enter opens the card:
the publishers' claims, the origin feed URL, unverified moved-feed
claims, an optional episode preview read from the feed itself, and
«Подписаться», which subscribes privately with the origin URL only.
«Уже подписан» opens the podcast in the Podcasts tab instead.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Split refresh::subscribe into input parsing and subscribe_url, so a
public card's origin URL can be subscribed to exactly as given, and let
the feed parser be reused for previews.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Shift+F in the podcasts context shares the selected or opened podcast
through PodcastStore::set_shared (a synced decision) or makes it private
again. A feed URL that looks private is confirmed first in a dialog that
lists the warnings in Russian. The reconciler runs after share and
unsubscribe actions, received podcast operations, feed refreshes, overlay
restarts and periodically; the list and side panel show the shared and
published state and publication errors.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
podcasts::publication builds one PodcastShareState per subscription (cards
from the catalog for shared podcasts only, the device-local privacy
confirmation) and hands them to PodcastDht::sync_shares, which publishes
what is shared and tombstones the rest. Without a readable store every own
card is revoked. Privacy confirmations live in a 0600 JSON file next to
podcasts.sqlite3 and cover exactly the confirmed URLs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The node serves FRID's podcast_dht overlay next to the similarity overlay
(cache federation/podcast-dht.sqlite3), runs its maintenance, hands peer
capability manifests to note_peer_capabilities and advertises podcast_dht
only while the overlay runs. A cache that cannot be opened is logged and
only turns discovery off. The running overlay is exposed through a watch
channel for the publication reconciler.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A device below sync v4 mirrors the redacted queue it gets with its own
types, which drop PlaybackTrack::source, so each "Private item" becomes
a bare music item. When it takes playback over (Play on it, a
paused-startup claim, automatic failover) or sends a command, it
announces those items, and this device adopted unplayable fake tracks
and passed them on to every v4 peer. States from such devices are now
cleaned on receipt, with a status message once per change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The prototype import commits inside PodcastStore::open and the imported
validators were dropped afterwards, once. A start that stopped in
between left them for good. A marker next to the store, written before
the import and removed once every podcast was handled, makes the step
run again at the next start. The imported failure count is recorded
again as it was, so the back-off is kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A stream without a file size whose decoder cannot measure its duration
only has the feed's itunes:duration, which is often longer than the
audio. Treat that duration as a hint: a clean close past 80 % of it is
the end. A duration the decoder measured keeps the strict completion
window. The interrupted message for a stream that cannot seek now says
to start over or mark the episode played instead of "press play".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A slow server could hold one of the four refresh slots for 60 s per
redirect hop. A feed or cover fetch now has an overall deadline (120 s).
Tests cover feeds over the size cap with and without Content-Length
(error recorded with back-off, catalog kept), the redirect cap, a
redirect loop, a non-http redirect, a hanging server, and covers (not an
image, over the cap, written atomically). The test server can stall.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The device-sync stream handlers exported and merged podcast snapshot
sections and operations synchronously on a Tokio worker. While a large
feed refresh held the store (up to about half a second), the worker's
other tasks (feed checks, streams, art) waited. Run that work in
block_in_place on the multi-thread runtime, and say so in ARCHITECTURE.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A 301 to a new host followed by a 302 (CDN, tracker) never moved the
feed, because only all-permanent chains counted; every check then went
through the old address without validators and re-applied the whole
feed. The target of the leading permanent hops is now recorded as the
new fetch URL (the old one becomes an alias); the document is still
parsed against the URL that served it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The prototype import keeps the prototype's ETag and Last-Modified, but
the prototype stored no seasons, episode numbers or types, and GUID-less
episodes stay provisional until the feed is parsed again. The first check
was answered 304 and a feed that no longer changes was never parsed.
Drop the imported validators right after the migration so the first
check downloads and applies the feed. Contract gap for the FRID import.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- The stream reader records whether the decoder stopped on a read error
and whether the server announced the file size. An episode whose
connection was lost (stall, expired URL) or whose sizeless stream
closed early is no longer completed at its full duration: the last
position is saved, playback stops on the episode and the queue does
not move on (playback::played_to_the_end).
- Streams are cancelled by the player's source generation: a superseded
start stops connecting or reading up to its resume offset, and a read
blocked inside the audio callback returns within 100 ms instead of up
to 30 s. The player no longer reports the end of a superseded source.
- A pause or resume pressed while an episode connects is applied when
its source arrives (Controller::expect_source).
- Seeks report their result (PlayerEvent::Seeked); an episode's seek is
saved only when the audio moved, and seeks while connecting or in a
stream without Range support are refused with a message.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A device below sync v4 got no playback snapshot while the queue held an
episode, so its engine never heard the owner's heartbeat and took
playback over by automatic failover after two minutes; this device then
adopted its queue and the episodes were gone. Send such peers the
coordination envelope with the queue redacted like for Jam: every
episode becomes an opaque "Private item", nothing is stripped, and their
commands stay refused while the queue has episodes.
This departs from FRID PLAYBACK_PROTOCOL.md rule 1 ("send None") and is
reported as a contract gap.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Podcast operations and playback commands with episodes carry feed and
audio URLs that may hold private tokens; the Logs tab shows this crate's
debug output. Log only their kind.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Queue items now cross the wire with their explicit source: episodes as
PlaybackSource::PodcastEpisode, received ones as TrackItem episodes, and
the source mode filter never drops them. A handoff carries the episode,
position and pause; an episode that becomes current at position 0
resumes from its saved position. A podcast queue is not handed to a
device below v4 (it needs an update), and playback commands from such a
device are ignored while the queue has episodes. Controlling a v4 device
may queue episodes.
Jam hosts publish redacted snapshots, so guests see numbered private
placeholders. Guest commands that add episodes are dropped; their
placeholders are mapped back to the host's episodes, and changes that
drop or duplicate them, or seek in them, are refused. A guest leaving a
Jam drops the placeholders.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This client now announces device-sync protocol 4. Podcast operations
are applied to the podcast store, kept in the log and relayed; those
that arrive before the store opens wait in sync_podcast_pending.
Snapshots carry the podcast sections, bounded by the shared limits and
by the line budget of each message, and are merged after the operations.
Operations, snapshot sections and playback state that need v4 are only
sent to peers that reported v4. Periodic progress checkpoints are
coalesced in the log, and the Podcasts tab reloads after changes from
other devices.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A device_profile_set and the pending pairing row used to store this
build's own protocol constant for another device, which would defeat
version gating. Self-reports (hello, pairing, the sender's own entry of a
devices list, its own profile announcement) now replace the stored
version and relayed profiles only raise it. Invites and profile
announcements carry the version, and the first start of a new version
announces it in the log.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The private copies of the device-sync wire types are replaced by
music_dht::device_sync. Golden tests keep the furumi-tui 0.3.x types
verbatim and check that v3 messages serialize byte for byte the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The progress tracker's observation step is now a pure method with tests
for listening time (jumps and pauses do not count), pause saves, the
checkpoint interval and one-time completion. A seek no longer marks the
playback completed by itself, so seeking into the last seconds still
sends complete_session on the next tick. The episode list render test
covers the live position of the playing episode.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Episodes stream from the publisher through the prototype's bounded HTTP
Range reader (ported, URL queries redacted from errors). The audio URL and
resume position come from the store at play time; a 4xx on the audio URL
refreshes the feed once and retries with the address it now lists, and a
stream that cannot seek refuses to start at a saved position instead of
playing from the wrong place. Prepared sources reach the audio thread
with the player's source generation, so a slow stream never replaces a
newer start or stop, and with their start offset for position reporting.
Progress follows the FRID contract through one ordered writer thread:
start_session or restart on start, checkpoints every 20 s and on pause,
explicit seeks, complete_session near the end or at end of stream, and a
final save with the last seen position on stop, track change, handoff
and exit. A superseded session stops checkpointing until the next
explicit action; listening sessions are recorded at pause, completion
and end. Enter on an episode plays it after the current item, b starts
it over, a/A queue it, and mark played goes through the same writer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Podcast episodes share the sentinel id -1, so the queue key now checks
the episode id first (ep:...) and falls back to TrackItem::key instead of
local:{id}. Likes, playlists, metadata edits, music history, content-id
lookups, share links, similarity and artist/release jumps skip episodes;
Shift-J and the info popup open the podcast instead. Sync protocol 3
cannot carry episodes, so peers and Jam guests get the private-item
placeholder, handoff of a queue with episodes is refused and remote
SetState commands do not replace such a queue.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
furumi-library 0.3.0 adds TrackItem.podcast, which makes TrackItem a few
hundred bytes larger. Box the track-info result and the federation status
in AppEvent so the event enum stays small (and clippy's
large_enum_variant does not fire on it).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The tab opens the FRID podcast store (podcasts.sqlite3, migrating a
prototype database in place; newer or foreign files are reported and left
unchanged) off the UI thread and shows subscriptions with unplayed counts
and check status, podcast -> seasons -> episodes navigation, and episodes
with saved position, played state, duration and date. Episode search,
played filter and order run as paged store queries with request sequence
numbers. Adding a feed, checking one or all feeds, marking played and
unsubscribing (with a confirmation that progress is kept) go through
Effect/AppEvent; a scheduler refreshes due feeds in the background.
New actions are bound in the podcasts keymap context and listed in a
Podcasts help section.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add src/podcasts: an HTTP client with conditional requests, hand-followed
redirects (permanent ones become feed aliases via PodcastStore::apply_feed),
size and time limits and a furumi user agent; subscribe and refresh flows
that parse feeds with the shared music-dht parser and keep the store's
local fetch state with exponential back-off and Retry-After.
DeviceSync::run_podcast_action hands PodcastStore actions stamps reserved
in the device-sync log and appends the operations they return with exactly
those stamps. Podcast operations stay out of outgoing sync batches until
this client speaks sync protocol v4.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
TrackItem gained a podcast field; music literals set it to None. The
music-dht podcast-feed feature provides the shared RSS/Atom parser.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>