// name: Morphing cube // protocol: furumi-visualizer-v2 // bundle-version: 6 // // Audio-reactive neon wireframe, echo contours, core, shock rings, sparks // and a bounded particle field. No native 3D API or retained state required. // Echoes sample earlier rotation times with CURRENT audio; they are analytic // trails, not stored frames. Particle lifetimes use time, rings also expand // as the smoothed beat envelope decays. No beat history is available in v2. // // Fixed budgets: 8 mesh vertices, at most 48 particles + 24 short tails, // 20 background stars, 3 rings, 2 echoes. Edges/rings use bulk trace commands. // Smaller terminals omit echoes/rings and reduce particle counts. fn clamp(v, lo, hi) { if v < lo { lo } else if v > hi { hi } else { v } } fn min(a, b) { if a < b { a } else { b } } fn rgb(r, g, b) { to_int(clamp(r, 0.0, 255.0)) * 65536 + to_int(clamp(g, 0.0, 255.0)) * 256 + to_int(clamp(b, 0.0, 255.0)) } // trace runs left-to-right. Swap endpoints for reversed edges and use // vline for vertical ones (including an edge projected to a single cell). fn edge(ax, ay, bx, by, fg, bg) { if ax > bx { let tx = ax; ax = bx; bx = tx; let ty = ay; ay = by; by = ty; } if ax == bx { return #{ op: "vline", x: ax, y: min(ay, by), h: abs(to_float(by - ay)).to_int() + 1, ch: "|", fg: fg, bg: bg }; } let dx = bx - ax; let dy = by - ay; let ch = if abs(to_float(dy)) * 3.0 < to_float(dx) { "-" } else if abs(to_float(dy)) > to_float(dx) { "|" } else if dy < 0 { "/" } else { "\\" }; let ys = []; let slope = to_float(dy) / to_float(dx); for x in 0..=dx { ys.push(to_int(to_float(ay) + to_float(x) * slope + 0.5)); } #{ op: "trace", x: ax, ys: ys, ch: ch, line_ch: ch, fg: fg, line_fg: fg, bg: bg } } // Lift quieter passages without a hard gain/clipping threshold. fn response(level) { 1.0 - pow(1.0 - clamp(level, 0.0, 1.0), 1.6) } fn palette(t, heat, light) { rgb((95.0 + 125.0 * heat + 35.0 * sin(t * 0.43)) * light, (185.0 - 95.0 * heat + 55.0 * sin(t * 0.31 + 1.3)) * light, 255.0 * light) } // A single projected mesh, fitted uniformly: never clamp individual corners. fn mesh(t, energy, bass, mid, treble, beat, width, height) { let pulse = 0.70 + energy * 0.45 + beat * 0.85; let sx = pulse * (1.0 + bass * 0.55); let sy = pulse * (1.0 - bass * 0.42 + mid * 0.15); let sz = pulse * (1.0 + treble * 0.22); // A bounded beat kick, not time * instantaneous_energy (which jumps). let ax = t * 0.47 + 0.35 + beat * 0.22 * sin(t * 1.3); let ay = t * 0.63 + 0.55; let az = t * 0.23 + beat * 0.16 * cos(t * 0.7); let cx = cos(ax); let snx = sin(ax); let cy = cos(ay); let sny = sin(ay); let cz = cos(az); let snz = sin(az); let twist = mid * 0.95 * sin(t * 0.83); let ct = cos(twist); let st = sin(twist); let vertices = [ [-1.0, -1.0, -1.0], [1.0, -1.0, -1.0], [1.0, 1.0, -1.0], [-1.0, 1.0, -1.0], [-1.0, -1.0, 1.0], [1.0, -1.0, 1.0], [1.0, 1.0, 1.0], [-1.0, 1.0, 1.0] ]; let projected = []; let extent = 0.01; for i in 0..8 { let v = vertices[i]; let pull = 1.0 + treble * 0.38 * sin(t * 2.3 + to_float(i) * 2.4) + beat * 0.14 * cos(to_float(i) * 1.7 + t); let x = v[0] * sx * pull; let y = v[1] * sy * pull; let z = v[2] * sz * pull; let xt = x * ct + z * st * v[1]; let zt = z * ct - x * st * v[1]; let y1 = y * cx - zt * snx; let z1 = y * snx + zt * cx; let x2 = xt * cy + z1 * sny; let z2 = z1 * cy - xt * sny; let x3 = x2 * cz - y1 * snz; let y3 = x2 * snz + y1 * cz; // Even the largest deformed vertex stays < 6.4 from the origin. let perspective = 10.0 / (10.0 + z2); let px = x3 * perspective; let py = y3 * perspective; if abs(px) > extent { extent = abs(px); } if abs(py) > extent { extent = abs(py); } projected.push([px, py, z2]); } // CELL_ASPECT is cell height / width; adjust for a different font. let CELL_ASPECT = 2.0; let span = min(to_float(width - 4) / CELL_ASPECT, to_float(height - 4)); let scale = span * min(0.23, 0.46 / extent); let center_x = to_float(width - 1) * 0.5; let center_y = to_float(height - 1) * 0.5; let points = []; for p in projected { points.push([to_int(center_x + p[0] * scale * CELL_ASPECT + 0.5), to_int(center_y + p[1] * scale + 0.5), p[2]]); } points } // Method calls mutate the command array in place; don't copy it into helpers. fn dot(x, y, ch, fg, bg, width, height) { let px = to_int(x + 0.5); let py = to_int(y + 0.5); if x >= 0.0 && y >= 1.0 && px < width && py < height - 1 { this.push(#{ op: "cell", x: px, y: py, ch: ch, fg: fg, bg: bg }); } } fn render(input) { let bg = 0x020610; let cmds = [#{ op: "clear", bg: bg }]; if input.width < 12 || input.height < 8 { return cmds; } let w = input.width; let h = input.height; let t = input.time; let energy = response(input.energy); let bass = response(input.bass); let mid = response(input.mid); let treble = response(input.treble); let beat = response(input.beat); let drive = clamp(energy * 0.4 + treble * 0.3 + beat * 0.8, 0.0, 1.0); let small = w < 40 || h < 16; let center_x = to_float(w - 1) * 0.5; let center_y = to_float(h - 1) * 0.5; let span = min(to_float(w - 4) * 0.5, to_float(h - 4)); let points = mesh(t, energy, bass, mid, treble, beat, w, h); let edges = [[0,1], [1,2], [2,3], [3,0], [4,5], [5,6], [6,7], [7,4], [0,4], [1,5], [2,6], [3,7]]; // Sparse drifting starfield; deterministic, independent of audio hardware. let stars = if small { 8 } else { 20 }; for i in 0..stars { let phase = to_float(i); let x = (phase * 37.71 + t * (0.3 + to_float(i % 3) * 0.2)) % to_float(w - 1); let y = 1.0 + (phase * 13.37) % to_float(h - 3); let light = 0.12 + treble * 0.16 * (0.5 + 0.5 * sin(t * 2.0 + phase)); cmds.dot(x, y, ".", palette(t, 0.0, light), bg, w, h); } // Three elliptical shock fronts. On a transient they brighten and // spread; release of the beat envelope carries them farther outward. if !small && drive > 0.04 { for ring in 0..3 { let phase = (t * 0.45 + to_float(ring) / 3.0) % 1.0; let radius = 0.22 + phase * 0.55 + (1.0 - beat) * 0.18; let rx = span * radius; let ry = span * radius * (0.22 + mid * 0.10); let left = to_int(center_x - rx); let right = to_int(center_x + rx); let top = []; let bottom = []; for x in left..=right { let nx = clamp((to_float(x) - center_x) / rx, -1.0, 1.0); let dy = sqrt(1.0 - nx * nx) * ry; top.push(to_int(center_y - dy + 0.5)); bottom.push(to_int(center_y + dy + 0.5)); } let fg = palette(t + to_float(ring), beat, (1.0 - phase) * (0.12 + beat * 0.45 + bass * 0.12)); for ys in [top, bottom] { cmds.push(#{ op: "trace", x: left, ys: ys, ch: ".", line_ch: ".", fg: fg, line_fg: fg, bg: bg }); } } } // Particles launch from the eight corners with staggered lifetimes. // Speed/age depend on time; audio changes reach and brightness instead // of rescaling time and teleporting particles on each audio update. if drive > 0.04 { let particles = if small { 16 } else { 48 }; for i in 0..particles { let fi = to_float(i); let age = (t * (0.27 + to_float(i % 5) * 0.025) + fi * 0.618034) % 1.0; let angle = fi * 2.39996 + t * 0.16; let dx = cos(angle); let dy = sin(angle); let origin = points[i % 8]; let travel = span * (0.35 + energy * 0.55 + beat * 0.8); let distance = age * travel; let light = sin(age * 3.14159) * (0.15 + drive * 0.85); let fg = palette(t + fi * 0.13, beat, light); let ch = if beat > 0.45 && i % 3 == 0 { "*" } else if treble > 0.35 { "+" } else { "." }; if !small && i % 2 == 0 { let tail = distance - span * 0.04; cmds.dot(to_float(origin[0]) + dx * tail * 2.0, to_float(origin[1]) + dy * tail, ".", palette(t, beat, light * 0.3), bg, w, h); } cmds.dot(to_float(origin[0]) + dx * distance * 2.0, to_float(origin[1]) + dy * distance, ch, fg, bg, w, h); } } // Analytic motion echoes. These are recomputed poses, not frame history. if !small && drive > 0.04 { for echo in [2, 1] { let lag = to_float(echo) * (0.14 + beat * 0.10); let ghost = mesh(t - lag, energy, bass, mid, treble, beat, w, h); let fg = palette(t + to_float(echo), 1.0 - beat, (0.08 + drive * 0.16) / to_float(echo)); for e in edges { let a = ghost[e[0]]; let b = ghost[e[1]]; cmds.push(edge(a[0], a[1], b[0], b[1], fg, bg)); } } } // A warm inner cage gives depth and a second pulse inside the main mesh. if !small { let inner = []; let size = 0.35 + beat * 0.25; for p in points { inner.push([to_int(center_x + (to_float(p[0]) - center_x) * size + 0.5), to_int(center_y + (to_float(p[1]) - center_y) * size + 0.5)]); } let fg = rgb(100.0 + beat * 155.0, 45.0 + energy * 75.0, 65.0 + treble * 70.0); for e in edges { let a = inner[e[0]]; let b = inner[e[1]]; cmds.push(edge(a[0], a[1], b[0], b[1], fg, bg)); } } let ordered = []; for e in edges { let depth = (points[e[0]][2] + points[e[1]][2]) * 0.5; let at = 0; while at < ordered.len() && ordered[at][2] > depth { at += 1; } ordered.insert(at, [e[0], e[1], depth]); } for e in ordered { let a = points[e[0]]; let b = points[e[1]]; let light = clamp(0.78 - e[2] * 0.14 + beat * 0.12, 0.3, 1.0); cmds.push(edge(a[0], a[1], b[0], b[1], palette(t, beat, light), bg)); } // Sparks travel along edges; no more than twelve extra cells. if treble > 0.08 || beat > 0.08 { for i in 0..12 { let e = edges[i]; let a = points[e[0]]; let b = points[e[1]]; let phase = (t * 0.8 + to_float(i) * 0.137) % 1.0; cmds.dot(to_float(a[0]) + to_float(b[0] - a[0]) * phase, to_float(a[1]) + to_float(b[1] - a[1]) * phase, "*", 0xffe8c0, bg, w, h); } } for p in points { if !small && beat > 0.45 { let glow = palette(t, beat, beat * 0.45); for offset in [[-1,0], [1,0], [0,-1], [0,1]] { cmds.dot(to_float(p[0] + offset[0]), to_float(p[1] + offset[1]), "+", glow, bg, w, h); } } cmds.push(#{ op: "cell", x: p[0], y: p[1], ch: "o", fg: 0xe8f6ff, bg: bg }); } if input.show_clock { cmds.push(#{ op: "text", x: 1, y: 0, text: input.clock, fg: 0xa6cde0, bg: bg }); } if input.paused { cmds.push(#{ op: "text", x: w - 7, y: 0, text: "paused", fg: 0xa6cde0, bg: bg }); } if w >= 16 { cmds.push(#{ op: "text", x: 1, y: h - 1, text: "MORPHING CUBE", fg: 0x527b98, bg: bg }); } cmds }